How-to change enrolled password on your ZKTeco - F17 Biometric Device

ZKTeco – F17 – How-To change an enrolled password.

Step 01

Press the Menu Button

How-To change enrolled password

Step 02

If you do not have an Admin Password setup, continue to Step 5

If you have an Admin password set up, it will show Admin Affirm 1 –

Start typing your Code/Pin, for example 999999.

How-To change enrolled password

Step 03

After you entered the Code/Pin, Press OK.

How-To change enrolled password

Step 04

Enter your password using the keypad and then Press OK.

How-To change enrolled password

Step 05

You are now in the MENU section. For this task, we will select User Manage and then Press OK.

How-To change enrolled password

Step 06

Select Enroll User and Press OK.

How-To change enrolled password

Step 07

Select Enroll Pwd (Password), then Press OK.

Step 08

You will then be asked if it is a New Enroll which in this case is not, so

Press the ESC (Escape) button.

Step 09

Then Enter the clock code of the employee you want to change the password for, and Press OK.

Step 10

Input the New Password and Press OK.

Step 11

Affirm the New Password, then Press OK.

Step 12

Press OK to Save.

Step 13

You will then be asked if you want to continue with the change, then Press OK

Step 14

When back on this page, just Press the ESC (Escape) button till you reach the Home Screen. Now you can ask the employee to type in his clock code and press OK, then input his new password and Press OK again to clock IN/OUT.