How-to enroll a password on your ZKTeco - F17 Biometric Device
ZKTeco – F17 – How-To enroll a new password.
Step 01
Press the Menu Button
Step 2
If you do not have an Admin Password setup, continue to Step 5
If you have an Admin password set up, it will show Admin Affirm 1 –
Start typing your Code/Pin, for example 999999.
Step 03
After you entered the Code/Pin, Press OK.
Step 04
Enter your password using the keypad and then Press OK.
Step 05
You are now in the MENU section. For this task, we will select User
Manage and then Press OK.
Step 06
Select Enroll User and Press OK.
Step 07
Select Enroll Pwd (Password), then Press OK.
Step 08
You will then be asked if it is a New Enroll which in this case it is, so Press OK.
Step 09
Then Enter the clock code of the employee in the PIN field and Press OK.
Step 10
Input the Password the employee will use and Press OK.
Step 11
Affirm the Password, then Press OK.
Step 12
Press OK to Save.
Step 13
You will then be asked if you want to do a New Enroll, in this case no, so Press ESC (Escape) button till back on Home Screen. You can let the employee enter his clock code and press OK, then input his password and Press OK again to clock IN/OUT.
