How-to enroll admin fingerprint on your ZKTeco - F17 Biometric Device

ZKTeco – F17 – How-To enroll a new Admin fingerprint.

Step 01

Press the Menu Button

How-To enroll Admin fingerprint

Step 02

If you do not have an Admin Password setup, continue to Step 5

If you have an Admin password set up, it will show Admin Affirm 1 –

Start typing your Code/Pin, for example 999999.

How-To enroll Admin fingerprint

Step 03

After you entered the Code/Pin, Press OK.

How-To enroll Admin fingerprint

Step 04

Enter your password using the keypad and then Press OK.

How-To enroll Admin fingerprint

Step 05

You are now in the MENU section. For this task, we will select User

Manage and then Press OK.

How-To enroll Admin fingerprint

Step 06

Select Enroll Admin and Press OK.

How-To enroll Admin fingerprint

Step 07

Select Enroll FP (Fingerprint) and Press OK.

Step 08

Scroll down to choose Admin under Admin Accredit and Press OK.

Step 09

It will then ask if it is a New Enroll, which it is, so Press OK.

Step 10

It will then ask for a PIN, this is the code for the administrator to type in when prompt before getting access to the Menu. Press OK.

Step 11

Choose a finger that the admin will be using to access the Menu, and let them put that finger on the fingerprint reader once and lift up.

Press the same finger down for a second time and third time. If the finger was not successfully enrolled, it will ask to try again. Just repeat Step 10, otherwise move to Step 11.

Step 12

It will then ask to save, so Press OK.

Step 13

After you save, it will ask if you want to do a New Enroll. You can select OK if you want to continue enrolling another Admin, or just Press the ESC (Escape) button till you reach the Home Screen. You can now ask the admin user to test and make sure he/she can access the Menu.