How-to enroll admin RFID card on your ZKTeco - F17 Biometric Device

Step 01

Press the Menu Button

How-To enroll Admin RFID card

Step 02

If you do not have an Admin Password setup, continue to Step 5

If you have an Admin password set up, it will show Admin Affirm 1 –

Start typing your Code/Pin, for example 999999.

How-To enroll Admin RFID card

Step 03

After you entered the Code/Pin, Press OK.

How-To enroll Admin RFID card

Step 04

Enter your password using the keypad and then Press OK.

How-To enroll Admin RFID card

Step 05

You are now in the MENU section. For this task, we will select User

Manage and then Press OK.

How-To enroll Admin RFID card

Step 06

Select Enroll Admin and Press OK.

How-To enroll Admin RFID card

Step 07

Select Reg RFID (Card) and Press OK.

4-min

Step 08

Scroll down to choose Admin under Admin Accredit and Press OK.

5-min

Step 09

It will then ask if it is a New Enroll, which it is, so Press OK.

6-min

Step 10

It will then ask for a PIN, this is the code for the administrator to type in when prompt before getting access to the Menu. Press OK.

7-min

Step 11

Show the card in front of the reader

8-min

Step 12

After the card read, it will beep and show a number. Press OK.

9-min

Step 13

It will then ask to save, so Press OK.

10-min

Step 14

After you save, it will ask if you want to do a New Enroll. You can select OK if you want to continue enrolling another Admin, or just Press the ESC (Escape) button till you reach the Home Screen. You can now ask the admin to test.

11-min